BLU-ITE
| Material Safety Data Sheet |
U.S. Department of Labor |
May be used to comply with OSHAs Hazard Communication Standard. 29 CFR 1910.1200.
Standard must be consulted for specific requirements
|
Occupational Safety and Health Administration
(Non-Mandatory form)
Form Approved
OMB No. 1218-0072
|
| Section I |
Manufactured By:
Safety Seal Products Corp.
Date Prepared October 2003
Blu-Ite
14545 Military Trail #139
Delray Beach,FL 33484
Toll Free: 877.633.2669
|
| Section II Hazardous Ingredients/Identity Information |
| Hazardous Components (Specific Chemical Identity; Common Name(s) OSHA PEL ACGIH TLV Other
....Is a
waterbased emulsion and is considered non-hazardous under the OSHA
hazard communication standard (29 CFR 1910-1200).
None of the
product's ingredients are found on any list of hazardous,
carcinogenic or banned chemical agents or materials generated by
them. This product contains no chemicals subject to SARA
Title III Section 313 part 372 reporting requirements.
|
| Section III Physical/Chemical Characteristics |
|
Boiling Point
183° F
Vapor Pressure @20c N/A
Solubility in Water 100%
Appearance and Order Green Liquid Mild Odor
Specific-Gravity (H2O = 1): 1.02
Melting Point N/A
Evaporation Rate (Butyl): 1
pH:
9.5 - 9.8
|
| Section IV Fire and Explosion Hazard Date Flash Point (Method Used) |
|
Flammable Limits - None
Flashpoint:
NONE
LEI - N/A
UEI - N/A
Extinguishing Media None
|
| Section V Reactivity Data
|
Stability Stable
Conditions to Avoid Avoid Freezing
Incompatibility (Materials to Avoid) None
Hazardous Decomposition or Byproducts N/A
Hazardous Polymerization Will Not Occur
|
| Section
VI Health Hazard Data
|
Emergency
and First Aid Procedures
Ingestion give copious quantities of fluids and seek medical
advice
Skin wash with soap and water
|
| Section VII Precautions for Safe Handling and Use
|
Steps to be taken incase Material is Released or Spilled Hose away with water
Waste Disposal Method In accordance with local, state, and federal regulations
Precautions to be taken in Handling and Storing Normal care should be taken to minimize risk or damage
Other Precautions Wash all exposed parts of skin after using
|
| Section VIII Control Measures
|
Respiratory Protection (Specify Type) Avoid breathing mist or spray
Ventilation
- Local Exhaust, Standard
- Mechanical (General), Standard
Protective Gloves Standard
Eye Protection Standard
Other Protective Clothing or Equipment Standard
Work/Hygienic Practices Standard
|
|
|
Products