All natural materials such as concrete, ceramic, marble, granite, terrazzo, quarry tile, slate, porcelain tile and bathtubs have natural void in them. The larger the void, the more the surface of that material is slip resistant. This void creates a tread for you to walk on. With ceramic or glazed tile, as well as porcelain, are coated to create a shiny finished look to a floor or fixture. These coatings fill in the natural void up to 70%. When you walk on the dry surface, you would not notice that the void has been filled. But, when the surface is wet, the water fills in the remaining 30% of the void and that is why a floor becomes slippery not allowing any space between the water and the bottom of your foot creating a hydroplane effect. Grip On^® microscopically treats the surface of your floor or fixture in a way that brings back the natural void via the treads in the surface material. So, when a floor or bathtub is wet, it still allows you to feel surefooted. Grip On^® Anti Slip Solution is a clear, chemical treatment that increases the co-efficient of friction and the safety of the surface when wet.

Q: How does Grip On^® Anti-Slip Solution work?
A: Grip On^® Anti-Slip Solution is a process that increases the coefficient of friction on a tile floor or a porcelain bathtub. It is not a coating that can wear off, but a process that creates a tread design on the mineral surface itself.

Q: Does the treated surface look or feel any different?
A: There is no discernible change in appearance. However, when wet, the feeling is SAFE!

Q: Why is there a need for Grip On^® Anti-Slip Solution?
A: Slip/Fall accidents are the nation’s #2 accidental killer. Over 9 million disabling injuries every year. Business insurance rates are skyrocketing. Increases of 25% annually are common.

Q: How long is the guarantee?
A: Bathtubs and showers guaranteed for 2 Years and traffic areas guaranteed for 1 years,

Q: Is Grip On^® Anti-Slip Solution difficult to apply?
A: No, a floor can be treated at the rate of 600 square feet per hour, per worker. Bathtubs require less than 10 minutes with no strenuous work.

Q: Does Grip On^® Anti-Slip Solution kill germs?
A: When you apply Grip On^® Anti-Slip Solution to floors, bathtubs and other surfaces, the chemical is known to inhibit the growth of, and kill some bacteria and fungi. Test data is still being accumulated on this and will be available at a later date.

Q: If my floor is sealed, can I still use Grip On^® Anti-Slip Solution?
A: Yes, Grip On^® Anti-Slip Solution will work through most floor seals and effectively apply the “invisible tread” (It may take two applications,).

Q: What if there is grease on my floor?
A: Grip On^® Anti-Slip Solution will, in fact, loosen and make it easier to clean any grease on your floor. Once again, it may take more than one application, but it will loosen all hardened grease on your floor.

Q: Can I wax over the Grip On^® Anti-Slip Solution?
A: NO. By waxing over the Grip On^® Anti-Slip Solution application, you will probably fill in the “invisible tread” that Grip On^® Anti-Slip Solution has placed on your floor. We recommend a dry buff to bring up the shine.

Q: Is Grip On^® Anti-Slip Solution dangerous?
A: It is about as dangerous as household bleach.